Register This Unit To A Dect Gap Base Station - Dectsys DeskDECT Manual

3.5. Register this unit to a DECT GAP base station

Every new unit must be registered to a DECT GAP Base Station before you can start making phone
calls.
To activate the DECT GAP Base Station's Registration Mode, please refer to the User Guide for that
Base Station for the Registration Mode procedures.
- Press the UP/Down keys
- Select REGISTER by using the UP/DOWN keys
- Press INT/OK key
- Select the number of the Base Station [BASE No.] by using the UP/DOWN keys
- Press INT/OK key
- Wait for 15 seconds until an 11 digit RFPI No. XXXXX-XXXXXX appears.
- Press INT/OK key
- Enter the Base Station PIN Code. Please refer to the appropriate Base Station user guide for the Pin
Code.
- Press INT/OK key
Once the unit has been successfully registered to the Base Station, it will remain in standby mode.
when the unit is in standby mode.
to confirm.
to confirm. It will display "Searching...".
to confirm.
to confirm.
.
8
.