Deactivating The Microphone (Mute); Last Number Redial; Calling From The Caller List - Dectsys DeskDECT Manual

4.6. Deactivating the microphone (Mute)

It is possible to switch the microphone off during a conversation:
- Press the C key
- Press the C key

4.7. Last number redial

The DeskDECT saves the last three dialed telephone numbers in the redial memory.
You can access the Redial list by pushing the REDIAL key
- Scroll through the Redial memory by pressing the REDIAL key
- When the desired number appears on the display, lift the receiver.
- The number will be dialed automatically.
- Press and hold the C key
from the list.

4.8. Calling from the Caller List

The DeskDECT saves the telephone numbers of the last 50 different calls in the caller list.
This is only done when the telephone number of the incoming call has been sent via the analogue
network.
- Press the MENU UP/DOWN keys
- Select CALLER ID by using the UP and DOWN keys
- Scroll through the Caller List by using the UP and DOWN keys
- When the desired number appears on the display, lift the handset.
The number will be dialed automatically.
to mute the microphone. (Red LED lights up on the handset).
again to re-activate the microphone. (Red LED goes off on the handset).
for 2 seconds to leave the redial list, if you do not want to make a call
when the unit is in standby mode.
in the stand-by mode.
and press INT/OK key
.
11
.
.