Table of Contents
Advertisement
4. USING THE DeskDECT
4.1. Switching the Handset On/Off
- To turn the unit off, press and hold the INT/OK key
No calls can be received when the unit is switched off.
- To turn the unit on, press and hold the INT/OK key
4.2. Making an external call
4.2.1. Direct call
- Pick up the handset or press the Speaker Phone key
- Enter the telephone number and wait for connection.
- To erase mis-keyed digits, press the Erase key C
4.2.2. Pre- dialing
- Enter the telephone number. To erase mis-keyed digits, press the Erase key C
- Lift the handset or press the Speaker Phone key
The phone number will be dialed automatically.
A maximum of 25 digits can be entered at any one time.
4.3. Making an internal call
If you have more than one handset subscribed to the base station, you can make an internal call be-
tween the handsets.
- Press INT/OK key
- Dial a handset No. The called handset will ring.
- When the called party answers, talk via the speaker phone hands-free
.
for 2 seconds while in standby mode.
again for 2 seconds.
. You will hear the external dial tone.
.
.
9
.
or lift the handset.
Advertisement
Table of Contents
