Call Transfer, On Hold, Toggle And Three Party Conference; Placing A Call On Hold; Transferring An External Call To Another Handset; Brokers Call (Toggling Between An Internal Call And An External Call) - Dectsys DeskDECT Manual

5. Call Transfer, On Hold, Toggle and Three Party Conference

5.1. Placing a Call on Hold (CH)
- To put a call on hold during conversation, press INT/OK key
Whenever the on-hold function is activated, the on-held party will hear music being played.
- To retrieve the call on hold, press the INT/OK key
- If you replace the handset while the caller is hold, that external call will call back.

5.2. Transferring an External Call to another Handset

- Make a call, or after receiving an incoming call, press the INT/OK key
- Enter the internal handset Number to transfer the call to, then hang up the handset to transfer the
external call.
You will be disconnected but both other callers can talk together.

5.3. Brokers Call (Toggling between an internal call and an external call)

If you place an external call on hold, you can make a call to another internal handset. You can then
toggle between the first and second call.
- Put the external call on hold by pressing the INT/OK key
- Call an internal handset number and when the call is connected, press the INT/OK key
/ switch between both calls. While one call is placed on hold you can talk to the other caller.
Please Note
If you replace the receiver and hang up on the call, both calls will be disconnected.
.
again.
.
13
.
to toggle