Steam Function - Swann SI12020N Manual

• Hold the lip and the top of the fabric brush and pull the attachment away
from the steamer head.
• Be careful of any residual heat when handling the unit.

STEAM FUNCTION

• Make sure there is enough water in the water tank.
• Plug into the power supply.
• Allow the garment steamer to heat for at least 2-3 minutes before com-
mencing steaming.
• To operate the garment steamer, simply hold the steamer securely
around the steamer body with one hand and use your index finger to
press the steam button to activate the steam.
• The steamer is suitable on any fabric that is hanging or in an upright
position; that allows the garment steamer to be move in an up and down
motion. For best results, gently stretch the fabric whilst steaming.
NOTES:
• The garment steamer generates high temperatures of steam. Do not
touch the steam head. Make sure the steamer is facing away from you
in an upright position.
• The garment steamer is designed to be used in an upright position on
hanging fabrics.
• Release the steam button to stop generating steam.
• When you are finished using the steamer, pull out the plug from the
power supply. Remove the water tank from the garment steamer body
and empty any remaining water. Replace the water tank and allow the
garment steamer to cool. Remove the fabric brush from the steamer
head and allow it to dry.
SI12020N_IM.indd 7
HOW TO USE
7
13/11/2017 12:06