Care And Cleaning - Swann SI12020N Manual

CARE AND CLEANING

• Remove the power cord from the outlet.
• Remove the water tank from the garment steamer body and empty any
remaining water. Replace the water tank and allow the garment steam-
er to cool.
• Remove the fabric brush from the steamer head and allow to dry.
• Deposits and other residues on the steam plate can be removed with a
cloth soaked in a diluted vinegar/water solution.
• To clean the exterior of your garment steamer, wipe with a damp soft
cloth and wipe dry.
• Do not use scouring pads, abrasives or harsh cleaners to clean the
steam plate.
• Do not add any perfume, vinegar or other chemicals to the water tank.
STORAGE
• Always ensure the steam outlet holes are clean, free from scaling and
not blocked.
• Check the hardness of your tap water before using it in this garment
steamer. Particularly hard water. If in doubt, use bottled or distilled
water.
• Store the garment steamer on its heel
• Do not drop, throw or try to bend the garment steamer.
• Do not attempt to disassemble the garment steamer.
• Avoid operating the garment steamer in humid or moist places.
• Do not place the garment steamer near a heat source or direct sun-
light.
SI12020N_IM.indd 8
HOW TO USE
8
13/11/2017 12:06