Table of Contents
Advertisement
Chore-Tronics NV Control
Notice to Electrician
Notice to Electrician
®
Each relay output in this Chore-Tronics
control is designed to control 1 H.P. for
many years of service. The relays are single pole, normally open contacts and break
only one line of the power to the various loads. (The control is not to be considered
the disconnect device for motor loads.) If a load of more than 1 H.P. is controlled by
a relay in the control, additional contactors are required and some of the basic
flexibility of the control is compromised. It is very important that the owner/
integrator understands that the grouping of loads compromises flexibility.
It is recommended that the installation diagram on page 15 be used to configure the
house. If this step is completed prior to wiring, it will eliminate any unnecessary
confusion.
7
MT1558B
Advertisement
Table of Contents
Need help?
Do you have a question about the Chore-Tronics Natural Ventilation and is the answer not in the manual?
Questions and answers