Maintenance And Cleaning; Protection Of Plastic Surfaces - Beko GNE 134620 X User Manual

6

Maintenance and cleaning

A Never use gasoline, benzene or similar
substances for cleaning purposes.
We recommend that you unplug the
B
appliance before cleaning.
B Never use any sharp abrasive
instrument, soap, household cleaner,
detergent and wax polish for cleaning.
B For non-No Frost products, water
drops and frosting up to a fingerbreadth
occur on the rear wall of the Fridge
compartment. Do not clean it; never
apply oil or similar agents on it.
Only use slightly damp microfiber
B
cloths to clean the outer surface of
the product. Sponges and other types
of cleaning cloths may scratch the
surface.
C Use lukewarm water to clean the cabinet
of your refrigerator and wipe it dry.
C Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda
to one pint of water to clean the interior
and wipe it dry.
Make sure that no water enters the lamp
B
housing and other electrical items.
B If your refrigerator is not going to be used
for a long period of time, unplug the
power cable, remove all food, clean it
and leave the door ajar.
C Check door seals regularly to ensure they
are clean and free from food particles.
A To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Never use cleaning agents or water
A
that contain chlorine to clean the outer
surfaces and chromium coated parts of
the product. Chlorine causes corrosion
on such metal surfaces.
A Do not use sharp, abrasive tools, soap,
household cleaning agents, detergents,
kerosene, fuel oil, varnish etc. to
prevent removal and deformation of the
prints on the plastic part. Use lukewarm
water and a soft cloth for cleaning and
then wipe it dry.
Protection of plastic
surfaces
Do not put the liquid oils or oil-cooked
C
meals in your refrigerator in unsealed
containers as they damage the plastic
surfaces of your refrigerator. In case of
spilling or smearing oil on the plastic
surfaces, clean and rinse the relevant
part of the surface at once with warm
water.
30
EN