Explicit Call Transfer - Philips CT6398/AYUSA0P2 User Manual

and select Conference. Repeat the above process until
five members are connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call by pressing
then select
Conference
conference call. If there is an incoming call during a
conference with five members already connected, you
can answer this new incoming call, but not add it to
the conference.
While a conference call is in progress, press
access the
Conf. members
member of the conference by selecting
,
and pressing to confirm, or select
82
, ,
. Press again and
to add this member to the
,
options. Disconnect a
Remove party
Private call
have a private call with this member only (other
members are put on hold).

Explicit call transfer

Subscription dependent
You can connect an active call and a call on hold. You
are disconnected when the transfer is completed.
During a call press
,
.
to
This feature is different from the Call forward, which
takes place before you pick up the call (see page 68).
to
,
, select and press
Transfer
Operator services