Table of Contents
Advertisement
phone emits an alert beep and the screen displays
waiting.
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls
(see page 68),
- activated the Call waiting option (see page 69).
If you receive a second call, press
•
accept the second call: the first one is put on
hold, the second one is active. If you want to
toggle between the two calls, press
select
Switch
calls. Each time you toggle from one
call to another, the active call is put on hold and
the call which was on hold is then activated. To
introduce the new caller into a conference
,
press
and select
•
reject the second call
•
end the active call, then your incoming call is
ringing.
Notes:
- If you also wish to answer the incoming call, press
(
)
; to reject it, press
-
If you have activated call forwarding 'If Busy' (see
"Call forward" page 68), you will never receive second
calls since they are always forwarded when the line is
Operator services
,
, then you can:
,
.
Conference
.
Call
Answer a third call
Subscription dependent
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is
limited to two current communications (one active
and one on hold).
then
Conference call
Subscription dependent
Conference
You may have up to five members at the same time
and end the conference with
calls are disconnected.
In order to make consecutive outgoing calls, first
initiate a normal call with the first number of the
conference. When the first member is on line, initiate
a second call as described in "Make a second call"
above. When the second call is engaged, press
You can activate the conference call by
making consecutive outgoing calls, or
create it from a multiparty call context.
)
. At this point all
,
81
Advertisement
Table of Contents
