Table of Contents
Advertisement
select Conference. Repeat the above process until five
members are connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call by pressing
select
to add this member to the
Conference
conference call. If there is an incoming call during a
conference with five members already connected, you
can answer this new incoming call, but not add it to
the conference.
While a conference call is in progress, press
access the
Conf. members
member of the conference by selecting
Operator services
,
,
. Press
again and then
,
options. Disconnect a
Remove party
,
and pressing
have a private call with this member only (other
members are put on hold).
Explicit call transfer
Subscription dependent
You can connect an active call and a call on hold. You
are disconnected when the transfer is completed.
During a call press
to
This feature is different from the Call forward, which
takes place before you pick up the call (see page 65).
to confirm, or select
Private call
,
, select
and press
Transfer
to
,
.
73
Advertisement
Table of Contents
