Table of Contents
Advertisement
Answer a third call
This option is subscription-dependent. While in communication and one call being
on hold, you may receive a third call. The phone emits an alert beep. You can either
end one of the calls before being able to answer the third one or introduce the
calling party into a conference (see below). This service is limited to two current
communications (one active and one on hold).
Conference Call
This option is subscription-dependent. You can activate the conference call by
making consecutive outgoing calls, or create it from a multiparty call context. You
may have up to five members at the same time and end the conference with
Conference
At this point all calls are disconnected. In order to make consecutive outgoing calls,
first initiate a normal call with the first number of the conference. When the first
member is on line, initiate a second call as described in "Make a second call" above.
When the second call is engaged, press
above process until five members are connected.
If there is an incoming call during the conference call, and if there is less than five
members, you can accept this new call by pressing
select
Conference
call during a conference with five members already connected, you can answer this
new incoming call, but not add it to the conference.
Explicit Call T ransfer
This option is subscription-dependent. You can connect an active call and a call on
Æ
hold. You are disconnected when the transfer is completed. During a call press
, select
This feature is different from the Call forward, which takes place before you pick up
the call (see page 30).
In-call symbols
During calls, the following symbols can be displayed:
Mute
Active call placed
on hold
82
to add this member to the conference call. If there is an incoming
Æ
Transfer
and press
Æ
and select Conference. Repeat the
Æ
. Press
.
Incoming call
Outgoing call
Å
Æ
again and then
Call underway
Other
operator
services
.
Advertisement
Table of Contents
