Explicit Call Transfer - Philips 855 User Manual

a second call as described in "Make a second call"
above. When the second
,
press and select Conference. Repeat the above
process until five members are connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call by pressing
then select to add this member to the
Conference
conference call. If there is an incoming call during a
conference with five members already connected, you
can answer this new incoming call, but not add it to
the conference.
While a conference call is in progress, press
access the
Conf. members
member of the conference by selecting
88
call is engaged,
, ,
. Press again and
,
options. Disconnect a
Remove party
,
and pressing
have a private call with this member only (other
members are put on hold).

Explicit call transfer

Subscription dependent
You can connect an active call and a call on hold. You
are disconnected when the transfer is completed.
During a call press
,
.
This feature is different from the Call forward, which
to
takes place before you pick up the call (see page 75).
to confirm, or select Private call
,
, select and press
Transfer
Operator services
to