Cattani MICRO SMART Operator's Handbook Manual page 31

Secondary Menus
I
Press to enter the Secondary Menus.
Pressing the key
Drive Status
This menu can be accessed without any access password.
The display shows useful information about the Micro-
Smart functioning.
User Parameters
Use the password 0000123000 to enter this menu.
From this menu the Vacuum Set Point and the unit's displa-
yed Language can be set.
System Parameters Setup
The password 0000456000 must be entered to gain access
to this menu. From this menu Off Delay Time and other
technical parameters can be set.
Factory Settings Restricted Access
This menu cannot be accessed by the user. It can be ente-
red by the manufacturer only.
30
takes you through the other menus.