Fixing The Rangehood; Fixing The Front Panel And Filter; Fixing The Flue Pipe; Recirculating Installation - Westinghouse WRI500SB Installation & User Manual

INSTALLATION

Fixing the rangehood

Use screw to fasten the rangehood to the wood
support from botton side.
ST 4 x 32
Fixing the front panel and filter
Replace the front cover by replacing the 4x screws,
then refit the filters.
-Note:The Edision Screw lamps may have come loose
during transportation. Ensure that lamps are tighted
firmly into the socket before fixing the front panel.
Fixing the flue pipe
Fix a Ø 120mm, non-combustible, rigid flue pipe to the
exhaust transition duct using cable ties or duct tape.
IMPORTANT!
If using a flexible duct, always install duct with the
wire helix pulled taut to minimise pressure and noise.

Recirculating installation

If recirculating installation is used, carbon filters are
recommended.
AR125WV
Installing carbon filters
Replace the air intake grills with carbon filters.
Optional carbon filters diminish cooking odours in the
recirculated air. Depending on the frequency of use and
the type of cooking, the expected life of carbon filters is
3 months. Using carbon filters will reduce the airflow of
the angehood.
Ducting accessories - WRI500SB, WRI700SB
For best performance Ø 120mm ducting is recommended
roof cowl
AR125RC
AR125F
AR125FD
AR125FJ
wall vent kit
AR125WV
Accessories can be bought from your local appliance
retailer, or in Australia at our online spare parts and
accessories store: shop.electrolux.com.au
5
air intake grill
carbon filter
bend AR125B
E653140