Table of Contents
Advertisement
8.4.1 To activate Baby Call mode
m
1
Press
MENU in idle mode, scroll
and press
Advanced Set
:
to
Baby call
2
Enter the master PIN when prompted and
m
press
OK to confirm.
Note
By default, the master PIN is 0000.
m
3
Press
SELECT to enter
:
4
Scroll
to
On
confirm.
5
Enter the Baby Call number and press
m
OK to confirm.
• A validation tone is emitted.
8.4.2 To deactivate Baby Call mode
m
1
Long press
mode has been activated before).
2
Enter the master PIN when prompted and
m
press
OK to confirm.
Note
By default, the master PIN is 0000.
:
3
Scroll
to
Off
confirm.
8.4.3 To change Baby Call number
m
1
Press
MENU in idle mode, scroll
and press
Advanced Set
:
to
Baby call
2
Enter the master PIN when prompted and
m
press
OK to confirm.
Note
By default, the master PIN is 0000.
:
3
Scroll
to
Number
m
SELECT.
• The last stored Baby Call number is displayed
(if any).
4
Enter the baby call number (maximum 24
digits) and press
• A validation tone is emitted and the screen
returns to previous menu.
34
m
SELECT, scroll
m
and press
SELECT.
.
Mode
m
and press
SELECT to
MENU (when Baby Call
m
and press
SELECT to
m
SELECT, scroll
m
and press
SELECT.
and press
m
OK to confirm.
8.5 Registration
:
to
The procedures described below are the
procedures that you will find in your handset. The
procedures may vary according to the handset
you want to register. In this case, please refer to
the manufacturer of the additional handset.
Additional handsets must be registered to the
base unit before you can use them. Up to 6
handsets can be registered to one base station.
The master PIN is required before you can
register or unregister handsets.
Note
By default, the master PIN is 0000.
1
On the base station, press and hold
approximately 3 seconds.
2
On the handset, press
to
Advanced Set
scroll
m
SELECT.
Note
If no action is taken on the handset within 10
seconds, the registration procedure will be
aborted. If this happens, please repeat Step 1.
3
Scroll
registered to and press
4
Enter the master PIN when prompted and
press
• If the PIN is incorrect,
:
displayed and the handset returns to idle
to
mode.
5
Upon successful registration, a validation tone
is emitted and the screen returns to idle mode.
8.6 Select best Base Station
One handset can be registered to up to 4
different base stations. By default, the handset will
register to BASE 1. If you select
handset will register to the nearest base station.
1
Press
Advanced Set
:
to
2
Scroll
press
m
and press
:
to
Registration
:
to select the base station to be
m
m
OK to start registration.
Incorrect PIN
m
MENU in idle mode, scroll
m
and press
and press
Select Base
:
to the desired base station and
m
OK to confirm.
C
for
:
MENU, scroll
m
SELECT,
and press
OK to confirm.
will be
, the
Best Base
:
to
SELECT, scroll
m
SELECT.
Advanced settings
Advertisement
Table of Contents
