Base station (SE765) Power adapter Handset Charger Line cord User manual Quick start guide Guarantee Note In multi-handset packs, there are additional handsets, chargers and power adapters. In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.
Connect Connect the base station Telephone Power Power socket socket socket Telephone base station Connect each end of the power adapter to: • the DC input jack at the bottom of the base station; • the power socket on the wall. Power Connect each end of the power adapter to (for multi-handset adapter...
Install Install the handset Charge 16 hours The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear the docking sound.
Configure your phone (if necessary) When you see the welcome message, press Select your country, press [SeleCt] to confirm. Set the date and time. » If the time is in 12-hour format, press » The phone is now ready to use. Check the battery level [OK].
Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press Adjust the earpiece volume Press or to adjust the volume during a call. Add a contact in the phonebook MeNU.
Listen to messages recorded on the answering machine Switch on/off the answering machine: Press Start/Stop listening to the recorded messages: Press Adjust the volume: Press Skip backward: When you listen to the messages, press message from the beginning. During the first second of the current message, to the previous message. Skip forward: Press Delete the current message: Press Note For more information, see the Telephone answering machine...