Sms; Write And Send New Sms - Philips SE7401B/51 User Manual

6

SMS

SMS stands for Short Message Service. To benefit
from this service, you must subscribe to Caller
Line Identification Service (CLI) together with
SMS service from your network provider. SMS
messages can be exchanged with a phone (mobile
or compatible fixed lines), provided the receiver
has also subscribed to CLI and SMS services.
The factory settings on your handset correspond
to the main national operator. If you wish to send
or receive SMS messages through another service
provider, you must set the corresponding
numbers (see "To set outgoing number" on
page 28).
You can create up to 10 SMS boxes (
) and protect each box with a password (only for
9
UK).
Your handset can store up to 50 SMS messages
(40 SMS in the Inbox and 10 SMS in the Draft box)
shared by all the SMS boxes and the maximum
length of each message is 160 characters.
In order to send and receive SMS messages, there
must be at least one SMS Box.
password is created by default (only for UK). For
more information, please refer to "Create a new
SMS Box (only for UK)" on page 27.

6.1 Write and send new SMS

Note
When composing your SMS, if there are no key
presses for 30 seconds, the handset will return to
idle mode. The edited message will be
automatically saved in the SMS editor buffer.
m
1
Press MENU in idle mode, press
m
SELECT to enter
m
SELECT again to enter
:
2
Scroll to the desired SMS Box (
) and press
Box 9
Otherwise, you may press
the next screen if you do not need to enter a
specific SMS Box.
3
Enter the PIN (if required) and press
24
Box 0
with empty
Box 9
, press
SMS
Write a SMS
Box 0
m
SELECT (only for UK).
m
SELECT to go
4
Enter the text and press
u
d
>
CLEAR
to
Box
1
2
3
4
5
6
7
8
9
0
#
*
.
Note
to
You can enter up to 160 characters for an SMS.
If you receive a call while writing an SMS, the
operation will be interrupted. When you go back
to SMS editing, the message will be retrieved
m
automatically.
.
OK
5
Enter the destination phone number and
press
m
Press to move cursor left
by 1 position.
Press and hold to jump to
the 1st character/digit.
Press to move cursor right
by 1 position.
Press and hold to jump to
the last character/digit.
Press to erase the previous
character/digit.
Press to return to the
previous menu if there are
no characters/digits on the
input screen.
Long press
characters/digits.
space 1 @ _ # = < > ( ) &
£ $ ¥ [ ] { } ¤ §
a b c 2 à ä ç å æ
d e f 3 è é
g h i 4 ì î
j k l 5
m n o 6 ñ ò ö
p q r s 7
t u v 8 ù ü
w x y z 9 ø
. 0 , / : ; " ' ! ¡ ? ¿ * + - % \ ^ ~ |
Long press
between upper and lower
case.
*
m
OK.
.
OK
to delete all
€
to switch
SMS