Table of Contents
Advertisement
ID9370_IFU_EN_US.book Page 10 Tuesday, February 13, 2007 12:48 PM
Configure your ID9370
EN
Language
Your ID9370 can support different display languages.
To change the language
m
1.
Press
MENU
, scroll
m
guage
and press
SELECT
:
2.
Scroll
to your desired language and press
A validation tone is emitted and the screen returns to previous menu.
Registration
The procedures described below are the procedures that you will find in your ID9370 handset.
The procedures may vary according to the handset you want to register. In this case, please
refer to the manufacturer of the additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6
handsets can be registered to one base station.
The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
Register your ID937
After charging it for a few minutes, the word WELCOME appears on a blue screen. Next, the
idle screen appears. Follow these steps to register your handset:
1.
In idle mode, the message
prompted on the screen. Follow the screen instructions to start registration.
2.
Enter PIN
will be displayed on your screen. Enter the default Master PIN number - 0000.
m
3.
Press
to confirm your registration.
OK
All the handset keys (except the
process is completed.
10
:
m
Personal Set
to
and press
.
m
to confirm.
SELECT
"Press Base page key for 3 secs. Press and hold
m
key) are deactivated until the above registration
:
Lan-
SELECT
, scroll
to
m
" will be
Advertisement
Table of Contents
