Telephone
Welcome
Quick start guide
1
2
3
What's in the box
SE740
SE745
Handset
Connect
Install
Base support
Enjoy
User manual
*You may find in the box the line adaptor delivered separately from the line cable. In this case, you have
to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power supply units
and additional rechargeable batteries.
WARNING
Always use the cables and batteries that came with your phone.
Base station for SE740
OR
Battery door
SE745
2 AAA rechargeable
Power supply
Line cord*
batteries
Guarantee
Quick Start Guide
1
Connect
Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity socket.
2. Place the base station face down so that you can see the bottom of the base station. Attach the base
support to your base station by fitting the tabs of the base support into the corresponding slots on
the base unit. Push into place until a click sound is heard.
3. Connect the line cord and the power cable to their corresponding connectors at the bottom of the
base station as shown.
4. Connect the other end of the line cord to the telephone line socket and the other end of the power
cable to the electricity socket.
1 1
1 2
1 3
2
Install
Insert rechargeable batteries and charge
Insert batteries
Charge handset for 24 hours
Configure your phone (if necessary)
After charging your phone for a few minutes, a Welcome screen may appear depending on the country
where you live. If the Welcome screen appears:
:
1. Scroll
to the word WELCOME in your preferred language and press
your selection.
:
m
2. Scroll
to your country and press
SELECT
to confirm your selection.
:
m
3. Press
to your operator (if necessary) and press
SELECT
again to confirm your selection.
Set date and time
m
:
Clock & Alarm
1. Press
MENU
in idle mode, scroll
to
and press
m
SELECT
again to enter
Set
Date/Time.
2. Enter the current time (HH:MM) and current date (DD/MM/YY) and press
A validation tone is emitted and your phone is now ready for use.
m
to confirm
SELECT
m
SELECT
, press
m
OK
.