Get the SADP software from the supplied disk or the official Website,
and install the SADP according to the prompts.
Follow the steps to activate the camera.
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the inactive
device.
STRONG PASSWORD RECOMMENDED – We highly
recommend that you create a strong password of
your own choosing (using a minimum of eight
characters, including upper case letters, lower case
letters, numbers, and special characters) in order to
increase the security of your product. We also
recommend that you reset your password regularly.
Especially in high security systems, resetting the
password monthly or weekly can better protect your
product.
NOTE:
The SADP software supports activating the cameras in batch.
QSG Network Dome Camera
Figure 36, SADP Interface
4