HIKVISION 21 Series Quick Start Manual page 31

2.3.3 Pendant Mounting
The pendant mounting bracket is not included in the package. You need
to prepare one in advance if you adopt this mounting type.
1. Mark the screw holes on desired mounting place.
2. Drill three screw holes for expansion bolts.
3. Route the cables and fix the pendant mounting bracket to ceiling.
4. (Optional) Insert the memory card to the camera, if your camera
supports memory card installation. Refer to Section 2.1.
5. Fix the camera to the cap of the pendant mounting bracket with three
supplied self-tapping screws.
QSG Network Dome Camera
Figure 24, Fix Pendant Mount
3