HIKVISION 21 Series Quick Start Manual page 29

4. Route and connect the cables. Source cables of network, power, etc.,
go in from the side outlet of the junction box. Camera cables go in
from the cap and the bracket.
NOTE:
If you install the camera outdoors, install the waterproof
jacket to the network cable. See Section 2.4.
5. Screw the cover back on.
6. Unscrew the bubble from the camera.
7. (Optional) Insert the memory card to the camera if your camera
supports memory card installation. Refer to Section 2.1.
8. Fix the camera to the cap of the wall mounting bracket with three
supplied self-tapping screws.
QSG Network Dome Camera
Figure 21, Cable Routing
2