Frequently Asked Questions - Philips SE1453B/05 User Manual

11 Frequently asked
questions
www.philips.com/support
Charging
The icon is not blinking
when the handset is placed
on the base
• Bad battery contact – move
the handset slightly.
• Dirty contact – Clean the
battery contact with a cloth
moistened with alcohol.
• Battery is full – no need to
charge.
Calls
No dialling tone
• No power – check the
connections. Reset the
phone : unplug and plug back
in the mains.
• Batteries are empty – charge
the batteries for at least
24 hours.
• You are too far from the base
– move closer to the base.
38
• Wrong line cable – use the
line cable provided.
• Line adaptor (when needed)
is not connected to the
line cord – connect the line
adaptor (when needed) to
the line cord.
Poor audio quality
The base is too close to
electrical appliances, reinforced
concrete walls or metal
doorframes – move the base at
least one metre away from any
electrical appliances.
The icon is blinking
• Handset is not registered
to the base – register the
handset to the base.
• You are too far from the base
– move closer to the base.
No ring tone
The ring tone is deactivated.
Increase the volume.
Caller Line Identifi cation
(CLI) service does not work
Check your subscription with
your network operator.

Frequently asked questions