Table of Contents
Advertisement
15 Frequently
asked questions
No signal bar is displayed on the screen.
to the base station.
If the handset displays [Unregistered],
Tip
For further information, see the chapter 'Services',
If I fail to pair (register) the additional
handsets to the base station, what do I do?
Tip
For further information, see the chapter 'Services',
My handset is in searching status, what do I
do?
Make sure that the base station has power
supply.
Move the handset closer to the base
station.
I have chosen a wrong language which I cannot
read, what do I do?
1
2
MENU/OK to access the main menu
screen.
3
Réglages > Langue
Phone setup > Language
> Idioma
4
5
The handset loses connection with the base
or the sound is distorted during a call.
Check if the ECO+ mode is activated. Turn it
optimal call conditions.
No dialing tone
Check your phone connections.
to the base station.
No docking tone
The handset is not placed properly on the
contacts with a damp cloth.
I cannot change the settings of my voice mail,
what do I do?
service provider but not the phone itself.
The handset on the charger does not charge.
Make sure the batteries are inserted
correctly.
Make sure the handset is placed properly
turned on. When the handset is placed
contacts with a damp cloth.
No display
Make sure there is power and the phone is
connected.
Bad audio (crackles, echo, etc.)
closer to the base station.
The phone receives interference from the
nearby electrical appliances. Move the base
station away from them.
EN
35
Advertisement
Table of Contents
