What’s in the box? SE240/SE245 handset Line cord* User manual Notes * The line adaptor may not be attached to the line cord. If this is the case, please connect the line cord to the line adaptor before plugging it into the line socket.
Connect Position the base Place the base within reach of the telephone line and power sockets. Connect the cables Plug the line cord and power cable into the sockets at the back of the base. Placing the base too close to large metal objects or electrical appliances can impair the range and sound quality.
Install Install the batteries Insert the batteries and slide the battery door into place. Charge handset Place the handset on the base to charge the batteries. The battery icon is displayed. Warning Leave the handset to charge for at least 24 hours before fi rst use. Set up your phone If the display shows the standby screen, your phone is ready...
Enjoy Make a call Enter the phone number and press Answer a call When the phone rings, press End a call Press Adjust earpiece volume During a call, press Redial last number Press then Change the ringer volume and ringtone •...