Recall Mode; Auto-Prefi - Philips SE1453B/05 User Manual

6.5 Recall mode

The button is used with
certain network services and
PABX*/switchboard services.
You will not normally need
to change this setting unless
advised to do so.
Note
The use of your SE145 cannot
be guaranteed on all PABX.
Press fi ve times.
1
The display shows FLASH
and the current setting
Press or
2
between
1 (Flash 1 with Time break
recall, or
2 (Flash 2 with Time break
recall).
Press to save the
3
settings.
You can now adjust Auto-
4
prefi x or press
return to standby.
28
6.6 Auto-prefi x
You can set the SE145 to detect
a dialling number and replace
it with another number. The
total of both numbers together
can be up to a maximum of
24 digits.
1
2
to switch
3
4
5
6
to
Press six times.
The display shows ( ---- - -
------ ).
In the fi rst set of spaces,
enter the number you
want to be detected (max.
4 digits).
Press or
the cursor.
Move the cursor to the
beginning of the second set
of spaces.
Enter the number you want
it replaced with.
Press to save.
You can now change the
system PIN or press
return to standby.
to move
to
Personal settings