Table of Contents
Advertisement
If there is more than 1 registered
handset, scroll n to select the unit
to call and press o Select.
• Once the intercom call is
initiated the
on the handset.
Press t to answer an intercom call
on the called handset, or l to
answer on the base.
• The intercom is established.
Note
Pressing h on any handset or l on
the base will exit intercom mode and
return other units to idle mode. If an
external call arrives during intercom
mode and you want to accept this call,
you must first exit intercom mode.
9.7.2 Transfer an external call to
another unit
During the call, press i to put the
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of the handsets registered to the
base and the base as well if you
are looking at the display on a
handset.
Scroll n to the unit you wish to
transfer your external call to and
press o Select.
Press t on the called unit to
answer the internal call, where both
internal callers can talk.
• Intercom is established.
Press h on the first unit to transfer
the external call to the called
handset.
40
icon is displayed
• The external call is transferred.
Note
If there is no answer from the called unit,
press i to resume the external call.
9.7.3 Answer an external call
during intercom
During intercom, a new call tone is
emitted when there is an incoming
external call.
Press h (l on the base) to exit
intercom mode.
To pick up the external call, press
o Line 1 / c Line 2 on the
handset or [/] on the base
station.
9.7.4 Switch between an internal
and external call
During the call, press i to switch
between an internal or external call.
9.7.5 Establish a three-party
conference call
The conference call feature allows an
external call to be shared with two
handsets, one handset and another
external call, or one handset and the
base. The three parties can share the
conversation and no network
subscription is required.
Use more of your phone
Advertisement
Table of Contents
