Delete All Call List Entries; Personal Settings; Change The Handset Name (Handset Only); Ring Settings - Philips SE6591B/17 User Manual

• A validation tone is emitted, the
call list entry is deleted, and the
display goes to the next entry in
the call list.
Note
Press c Back to discard the deletion.
The screen returns to the Call List
menu.
11.4

Delete all call list entries

Press u in idle mode, then press
o Menu.
Scroll n to Delete All and press
o Select.
Delete All? is displayed on the
screen. Press o OK to confirm
deletion.
• A validation tone is emitted. The
display shows List Empty for 2
seconds and returns to the idle
mode.

12 Personal settings

12.1 Change the Handset Name
(Handset only)
You can name the handset and display
the handset name in idle mode. The
default handset name of your handset is
Philips.
Press m in idle mode, scroll n to
Personal Set and press o Select.
Handset Name is highlighted.
Press o Select.
48
The last stored name is displayed.
Press c Clear to delete the
characters one by one or a long
press to delete all.
Enter the new name and press o
OK to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.2

Ring Settings

12.2.1 Set the Ring Volume

Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
You can set the ring volume
independently for each registered
handset, as well as the base station.
Handsets have 5 ringer volume levels,
plus progressive and off. The base station
has 5 ringer volume levels plus off. The
default setting for both handsets and the
base station is level 3.
To adjust ring volume on the
handset:
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Handset Tones and
press o Select. Ring Volume is
highlighted. Press o Select.
Personal settings