Table of Contents
Advertisement
the power adaptor is plugged into
mains supply which is switched on.
• Check if the answer machine is off, or
Answer only mode is selected.
• Check to see if the answering
machine is memory full. If so, delete
some or all messages.
• Try switching off the power at the
mains socket, and then turn it on
again after 1 minute.
Unable to perform remote
operation
• Make sure the remote access is on
(see Section 15.6.2).
• Make sure you entered the correct
remote access code.
• Use a touch-tone phone.
Note
If the above solutions do not help,
remove the power from both the
handset and the base. Wait for 1 minute
and try again.
68
Frequently asked questions
Advertisement
Table of Contents
