Table of Contents
Advertisement
handsets. In this case, please refer to the
manufacturer of the handset. Additional
handsets must be registered to the base
station before you can use them. Up to 8
handsets can be registered to one base
station.The PIN is required before you
can register or unregister handsets.
Note
By default, the PIN is 0000.
13.6.1 Easy registration
Insert the unregistered handset in
the base station to automatically
begin registration.
Registering... is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
Note
Easy registration is possible only when
the PIN has not been changed and is still
the default PIN, 0000.
13.6.2 Manual registration
On the base station, press and hold
a for 3 seconds. A beep sounds to
indicate that the base is ready to
accept registration.
Note
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
Advanced settings
On the handset, press m, scroll n to
Advanced Set and press o
Select.
Scroll n to Register and press o
Select.
Enter the PIN when prompted and
press o OK to confirm.
Registering... is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
13.7
Unregister
Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Scroll n to Unregister and press
o Select.
Enter the PIN when prompted and
press o OK to confirm.
Scroll n to select the handset
number to unregister and press o
Select. Press o OK to confirm.
• A validation tone is emitted to
indicate successful unregistration.
Note
You can only use a SE659 handset to
unregister a handset that does not
belong to the SE659 range.
55
Advertisement
Table of Contents
