Save - SAF 0.3-3 GHz Spectrum Compact User Manual

0.3-3 GHz SPECTRUM COMPACT (FW V5.2.6)

2.10 SAVE

Tapping the SAVE button instantly saves the spectrum curve with an automatically
generated file name: the first letter indicates the trace mode ("C" corresponds to
NORMAL, "M" to MAXHOLD, "W" to CUMULATIVE, "A" to AVERAGE 2/4/8/16 and "N"
to MIN/MAXHOLD) and the remaining digits are the file order number.
SAVE button is not available if at least one full sweep has not been done with
the current sweep settings.
Holding the SAVE button for a few seconds allows saving the current spectrum
curve with a custom file name. The name can be up to 8 characters long.
When assigning a custom file name, it is checked whether the name does not
match with an already existing one. In that case it is not possible to confirm.
When saving, the continuous sweep is stopped and the saved curve is displayed on
graph, with the assigned filename in the upper left corner. To close the file and resume
real-time sweep, tap SWEEP CONT. If no buttons are pressed, the real-time sweep is
automatically resumed after 3 seconds. The saved spectrum curves can be reviewed
at any time at TOOLS & SETTINGS  FILES.
The SAVE button File with automatically assigned name
27
OPERATION