Placing System Into Operation - Pentair PERFORMA CV Series Service Manual

PLACING SYSTEM INTO OPERATION

After you have performed the installation steps, the system
will need to be placed into operation.
All Logix 764 controls are shipped in the service
NOTE:
(treated water) position.
The incoming supply water should be turned off.
Table 1 Pre-Programmed Values
Type
255A 255
273A 273
278A 278
293A 293
298A 298
255P 255
273P 273
278P 278
293P 293
298P 298
255L 255
263L 263
268L 268
273L 273
278L 278
293L 293
298L 298
Power Up the Control
1. Plug the transformer into a non-switched outlet. The
display will show the valve type that was loaded from
memory.
If this is the first time the control is powered up, the display
will show "255A".
2. Use the or buttons to increment through the
available selections (Table 1).For the next steps you may
want to remove the cover to watch the camshaft
movement.
3. Press to enter the value type and the proper pre-
programmed valves for your application:
273A: For twin alternating filter systems
278A: For twin alternating conditioner systems
273P: For twin parallel filter systems
278P: For twin parallel conditioner systems
273L: For single or multiple tank filter systems with
regeneration lockout or remote regeneration start
278L: For single or multiple tank conditioner systems with
regeneration lockout or remote regeneration start
4. The display will show --:--. Select media volume or "F"
for filter setup. If a number or "F" is displayed, the resin
volume or a filter valve has been programmed.
Finish programming the Logix 764 control using the Level I
programming guide.
The cam will move to service if not already in service. For
alternating systems, Tank 1 will move to standby and Tank
2 will move to service. For parallel systems, both tanks will
move to service.
These cam movements may take up to five minutes.
Valve
Twin Alternating
Twin Parallel
Single Tank Remote Regeneration or
Multi Single Tank Lockout
AUTOTROL
System
8-cycle conditioner
Filter
5-cycle conditioner
Filter
5-cycle conditioner
8-cycle conditioner
Filter
5-cycle conditioner
Filter
5-cycle conditioner
8-cycle conditioner
Filter
8-cycle conditioner
Filter
5-cycle conditioner
Filter
5-cycle conditioner
Logix 764 Control Performa Cv Series Valves (273, 278) Service Manual
®
Connection in Inches
3/4
1
1
2
2
3/4
1
1
2
2
3/4
1
1
1
1
2
2
• 11