Table of Contents
Advertisement
11.3
Recall selection
Recall is a signal that needs to be sent to
the network when making or answering a
second call. Your phone shall already be
set up for use in your country. For details,
consult your service provider.
11.3.1 Setting the recall duration
There are 3 recall time options: Short,
Medium, and Long. The number of
available options varies with different
countries.
1
Press
MENU
2
Select
ADV. SETTING
. Press
TIME
3
Select the new setting. Press
• The setting is saved.
11.4
Dial mode
This feature only applies to model(s) that
support both tone and pulse dialing.
Dial mode is the telephone signal used in
your country. Your phone supports tone
(DTMF) and pulse (rotary) dialing. Your
phone shall already be set up for use in
your country. For details, consult your
service provider.
11.4.1 Setting the dial mode
1
Press
MENU
2
Select
ADV. SETTING
. Press
MODE
3
Select the new setting. Press
• The setting is saved.
Advanced Settings
.
>
RECALL
.
OK
OK
.
>
DIAL
.
OK
OK
Tip
Temporary Tone
dialing, press and hold
temporary tone mode. 'd' displays. Digits
entered after 'd' are sent out as tone
signals (for this call only).
11.5
Area code management
This feature only applies to model(s) with
area code support.
This feature automatically removes the
area code of an incoming call. You can
define an area code (up to 5 digits) you
want to remove. The phone number will
be saved in the call log without the area
code.
.
11.5.1 Activating area code
1
Press
2
Select
CODE
3
Enter the area code. Press
• The setting is saved.
11.5.2 Deactivating area code
1
Press
2
Select
CODE
3
Use
Press
• The setting is saved.
.
. If your phone is in pulse
*
removal
.
MENU
ADV. SETTING
. Press
.
OK
removal
.
MENU
ADV. SETTING
. Press
.
OK
to delete all the digits.
CLEAR
.
OK
during a call for
>
AREA
.
OK
>
AREA
29
Advertisement
Table of Contents
