Overview Of The Sonicwall Email Security Appliance - SonicWALL Email Security 800 Getting Started Manual

Overview of the SonicWALL Email Security Appliance

SonicWALL Email Security Appliance
SCSI Drive 1 SCSI Drive 2
* Alerts are explained in detail in light path diagnostic panel. To access, push the diagnostic panel
release latch to the left and pull out the panel.
Alert:
Do not plug devices into any ports (other than those indicated) unless explicitly
instructed to do so by a SonicWALL technical support representative. Doing so may void your
warranty.
SCSI Drive Bays
Power LED
Power Button
Diagnostic Panel
Alert LED
HDD LED
LAN Port
Serial Port
Power Supplies
Page 6
LAN Port Serial Port
Allows SCSI drives in a RAID array to be hot-swapped should one drive fail.
Indicates the SonicWALL Email Security appliance is powered on.
Allows the SonicWALL Email Security appliance to power on or off.
Can be pulled out (push release lever to the left) for detailed explanation of alerts.
Indicates an alert. See Diagnostic panel for more information.
Indicates data transfer to and from the hard disk drive.
Allows the SonicWALL Email Security appliance to connect to your local area
network or management station.
Allows direct connection to the appliance via terminal services to use the CLI.
Two power supplies allow the SonicWALL Email Security appliance to utilize
redundant AC power using the supplied power cables.
Power LED
Power Button
Power Supply 2
Power Supply 1
Diagnostic Panel Release
Alert LED*
HDD LED