S53 Tee Fitting - Toro 41569 Installation Instructions Manual

9. Cut the by-pass hose half way between the boom valves
and the tank (Fig. 12).
1
Figure 12
1. By-pass hose
2. Agitation hose
10. Using liquid soap on the barbs, insert an S53 tee fitting
assembly into the break and secure it using 2 large,
plastic hose clamps (Fig. 12).
11. Cut the agitation supply hose in half (Fig. 12).
12. Using liquid soap on the barbs, insert an S53 tee fitting
assembly into the break and secure it using 2 large,
plastic hose clamps (Fig. 12).
Installing the Control Valves
1. Install the control box mounting bracket to the boom
holder or control box support bracket as appropriate
(Fig. 13) using 2 flange-head bolts (5/16 x 3/4 inch) and
2 flange nuts (5/16 inch).
3
2
m–6380
3

3. S53 tee fitting

2
m–6355
Figure 13
1. Control box mounting
bracket
2. Flange-head bolt,
5/16 x 3/4 inch
2. Connect the end of the lever assembly on the small ball
valve assembly to the control valve assembly (Fig. 14).
5
4
1
2
Figure 14
1. Control valve assembly
2. Fitting and retainer
3. Small ball valve assembly
6
1
2
3. Flange nut, 5/16 inch
5
3
4
m–6382
4. Lever assembly
5. Axis of the lever
assembly