Start Using Your Cyberscanner
1. Insert the SD Card into the Cyberscanner.
Insert the SD card into the SD Card Slot located at the
back of the scanner. Make sure that the golden print
on the card is facing downward. The card will be
locked into place with a gentle push when correctly
inserted.
Note:
Only accepts SD and SDHC card (Maximum 32GB).
Card with SDXC class is not compatible.
2. Connect the electric power to your Scanner.
Connect the Type-C USB cable terminal to the
Type-C USB Connector of the Scanner.
Connect the USB plug to the Power Adaptor or the USB
port of your computer. Either device will supply the power
needed by the scanner.
-7-
EN
Need help?
Do you have a question about the Cyberscanner View and is the answer not in the manual?