EN
Image Brightness and Color Adjustment
The brightness and color of the image are preset
automatically. Normally additional adjustment is not
needed however from time to time film brightness and
color fade out may need adjustment.
Depending on what you want to adjust press the
Brightness
or RGB
buttons and you will see the
following icons display on the LCD screen for adjustment.
Brightness Adjustment
RGB Color Adjustment
To adjust
RGB use the Playback(
) button to move to
the color you want to adjust. Press the
or /
buttons to select the value of adjustment you want then
press the OK/(
) Button to confirm your selection. The
adjusting icons will disappear, Press the OK/(
) Button
once more to scan the adjusted picture.
)
Pressing the 'return' icon(
resets the adjusted colors
to their default setting.
Important Notes:
After adjusting the brightness and/or RGB settings, these
settings will remain for all subsequent scans until adjusted
again or until the Cyberscanner power is turned off.
When the scanner is turned off the brightness and RGB
settings return to their default settings.
-15-
Need help?
Do you have a question about the Cyberscanner View and is the answer not in the manual?