Easypix TSN510 Manual

TSN510 Manual

1. Key features

600/300 dpi resolution scan selection
Directly save JPEG file to microSD/SDHC card
Support microSD/SDHC card up to 32GB
Driver free to download for Windows® XP, Windows® Vista™,
Windows® 7 and Mac OS® 10.4 or above
(direct plug-in, driver installation not required)

2. Functional parts

Part Function
Select High(600dpi) / Low(300dpi) resolution;
1 Resolution High / Low resolution mode icon will be displayed on
status LCD screen.
2 Stitch file Create new folder for file storage.
Power On/Off: Switch this key left or right to turn
3 Power button
scanner on or off.
In power on mode, press this button to start scanning,
4 Scan
press this button again to stop scanning
5 Scan LED indicator Ready for scan: Green LED on
Error LED indicator
6 Over speed: Red LED on
7 LCD screen Scanning status display
8 SF LED indicator Stitch file: White LED on
9 Battery door For 4.2V rechargeable battery
10 microSD card slot microSD/SDHC card storage location.
Download photo to a computer via USB cable
11 USB interface
provided.
12 Time set Press to enter Time and Date setting mode
13 Format button Press this button to format the microSD/SDHC card.

3. Explanation of the status icons

Item Function
1 SD card indicator
Photos will be stored in microSD card
2 Battery indicator Battery is full
3 Counting indicator
Show scanned files in microSD card
4 Selected resolution High:600 dpi / Low:300 dpi
4. Using the scanner
4.1 Installing the battery
1. Open the battery door by sliding the battery compartment downwards as indicated by
the arrow in the diagram below.
2.
Make sure battery is in the battery compartment. If not, insert 4.2V rechargeable
lithium polymer battery into compartment.
3.
Turn on the scanner by switching the [POWER] button left.
4.2 Inserting a microSD memory card (not included)
To operate the scanner, you must insert a microSD Card (not supplied) to record and store your
pictures. Inserting the microSD memory card:
1. Turn OFF the scanner.
2.
Insert the microSD card into the microSD card slot (with metal side facing upwards).
Gently press in until card is latched.
Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory
card. Align microSD card position (as marked) and try again.
4.3 Time setting
1.
Press [TIME SET] button to enter time setting mode by using a thin, blunt object, such
as a paperclip to access the button. The LCD screen will read "1##" for the year. "##" is
a set of number that would be changed to correspond to the actual time/date setting.
2.
Press the [STITCH FILE] or [DPI] buttons to select the current Year.
3.
Press [SCAN] button to confirm setting. The LCD screen will now read "2##."
4.
Repeat steps 2 and 3 to select the Month, Date, Hour, and Minute.
5
After setting the Minute, "5##", press the [TIME SET] button again to complete the Time
and Date setting.
4.4 Formatting the microSD memory card
Note: All contents on the microSD card will be erased during formatting.
1.
Insert a microSD card into the scanner with metal side facing upwards. Then power on
the scanner.
2. Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to
access the button. An "F" shows on the LCD screen.
3.
Press the [SCAN] button once to begin formatting microSD card.
Description
4.
The microSD card indicator will blink until the formatting process is complete.
4.5 Calibrating your scanner
Empty battery
Note: Perform calibration only when white balance needs adjustment.
1. Turn on the scanner by sliding the [POWER] button to ON. Then place the scanner on
the provided "White Balance Calibration" paper.
2.
Click and hold onto the [STITCH FILE] button. While holding onto the [STITCH FILE]
button, press the [SCAN] button once and then release both bottons. SD symbol
Indicator Setting
1## Year
2## Month
3## Date
4## Hour
5## Minute
flash and "GREEN" and "RED" LED light will turn on.
3. Do not move the scanner. Wait until the "RED" LED light turns off. "GREEN" LED light
will stay on.
4. With only the "GREEN" LED light on, start scanning the white paper by sliding the
scanner across the paper until the "GREEN" LED light turns off. (Slide the scanner
backwards if necessary).
5. Slide the [POWER] button to OFF to turn off the scanner. Calibration is complete.
4.6 Setting the resolution
1. By pressing the [DPI] resolution button on the scanner, you may choose between high
resolution (600 dpi) and low resolution (300 dpi).
2. The high or low resolution mode will be displayed on the LCD screen to reflect your
choice.
4.7 Stitch file
To group scanned files into a new folder within the microSD card use the Stitch file function.
1.
Press the [STITCH FILE] button to create a new folder within the microSD card for files
storage. SF white LED light will turn on.
2.
Then scan your documents. Your files will be saved into the new folder.
3. To save another new set of scans in another folder, press the [STITCH FILE] button
again to generate a new folder.
For free optional stitching software, please download the program from the following link:
http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/
4.8 How to scan
Note: To scan, make sure your scanner is not connected to the computer.
1. Turn on the scanner by sliding the [POWER] button to ON.
2. Place the document on a flat surface and hold down the document with one hand.
3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto
scanner.
4.
Hold the scanner flat against the material and then press the [SCAN] button once.
5. Slide the scanner slowly, keeping you hand stable to get the best quality picture.
6. Press the [SCAN] button again to stop scanning.
5. LED light indications
will