Easypix Cyberscanner View User Manual page 4

harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment on to off, the
user is encouraged to try to correct the interference by
one or more the following suggestion.
Reorient or relocate the receiving antenna.
l
Increase the distance between the equipment and
l
the receiver.
Connect the equipment to a different power outlet
l
other than the one where the receiver is connected.
Consult an experienced television or radio
l
technician for help.
CAUTION:
To comply with the limits for a Class B Digitize
l
device, pursuant to Part 15 of the FCC Rules, this
device must only be installed on computer
equipment certified to comply with the Class B limits.
This unit may contain a microcomputer for signal
processing and control function. In very rare situations,
severe interference, noise from an external source, or
static electricity may cause it to lockup. In the unlikely
event that this should happen, turn off the unit, wait at
least five seconds, and then turn it back on again.
-3-
EN