Table of Contents
Advertisement
EN
Place Slide / Film Into The Holder
The Cyberscanner supports 50X50mm transparent
slides, color negatives and B&W negative films, for
135/110/126 size films.
1. Scanning 50X50mm Transparent (Positive) Slide:
Insert the Main Holder (Slide Holder) according to the
triangular mark on the scanner and the holder, in to the
slot on the right hand side. You may now insert your slides
one by one into the scanner through the opening of the
slide holder, as shown in below diagram. You can keep
the slide in position by referring to the image shown on
the LCD screen. Press the OK/(
) button to scan the
image. The image is saved into the SD Card
automatically.
2. Scanning 135/110 and 126 negative films:
Open up the Main holder, select the Film Adaptor of the
type of film you want to scan, place it in the main holder,
ensuring that the 4 pins of the film adaptor are properly
inserted into the 4 holes of the Main Holder. Close the
-13-
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cyberscanner View and is the answer not in the manual?