Expansion Variants Of The Mobile Terminal; Scanner; Camera; Wlan/Bt-Compatible Short-Range Radio - ACD M2Smart Series Brief Overview

18 Expansion Variants of the Mobile Terminal

18.1 2D scanner
There is a 2D scanner available for the mobile terminal. The scanner is on top of the housing under the disk.
ACD Elektronik GmbH has developed a scanner driver/scanner service to activate the scan module. The
program and detailed documentation and the development files are available from ACD Elektronik GmbH.
The table below contains the typical read distances of the 2D scanner:
Barcode size
Code 39:
20 mil
Code 128:
DataMatrix: 10 mil
* Not specified, as the minimum distances depend greatly on the width of the barcode and scanning angle.

18.2 Camera

There is a 5 MP auto-focus camera with flash/lighting on the rear side of the mobile terminal.

18.3 WLAN/BT-compatible short-range radio

Optionally integrated into the mobile terminal is WLAN according to IEEE 802.11/a/b/g/n and BT-compatible
short-range radio according to BT standard V3.0 + HS.
4
WLAN security : WEP, WPA, IEEE802.11i (WPA2), WPA2-PSK, Personal and Enterprise, 802.11x: PEAP-
MSCHAPv2, EAP-TLS
4
Standard encryptions are ACD-validated
M2Smart_Set_Kurzübersicht_Brief Overview_V1.00_de_en
Min. distance
4.0 mil Approx. 8.4 cm
5.0 mil Approx. 5.1 cm
*
5 mil Approx. 7.1 cm
Approx. 7.4 cm
Max. distance
Approx. 22.4 cm
Approx. 34.3 cm
Approx. 76.2 cm
Approx. 20.8 cm
Approx. 25.7 cm
37 / 50