Advertisement
Service-Documentation
14. SERVICING THE LIFT ARM
14.1
Disassembling the lift arm
Remove inner casing.
Remove gear segment. Remove 4 Phillips screws
from lift arm. The lift arm can now be easily removed.
14.2
Replacing the gears with lift arm removed
Disassemble mounting clamps.
- Loosen Phillips screw at transfer sprocket and pull
out sprocket toward front.
- Pull out square shaft with pliers.
15. SERVICING THE CONTROL PANEL
15.1
Replacing the EPROM
Refer to insert sheet for EPROM 94069
15.2
Exchanging the power switch
- Pull off connections and control foil
- Push switch out
15.2.1 Disassembling switch and display PC-board
- Pull off control buttons.
- Push spacers of BCD-switches outward and pull out
- Loosen Phillips screws at PC-boards, lift PC-boards
and carefully pull out of housing.
15.3
Disassembling the main PC-board
Open unit
- Loosen (5) socket screws at PC-board
- Pull off connectors
- Remove PC-board
JOBO Labortechnik GmbH + Co. KG
Kölner Str.58
D-51645 Gummersbach (Derschlag)
ATL-1500
Made in Germany
Technical modifications are reserved
09097
Hide quick links:
Advertisement
