Service-Documentation - JOBO ATL-1500 Service Documentation

Service-Documentation

1. GENERAL ASSEMBLY
1.1 Removing the inner casing
1.1.1 Remove mounting screws with Phillips screw
driver and pull out drain valve
1.2 Opening the unit
1.2.1 Empty the unit (see BA page 34, section 12.5)
1.2.2 Pull out drain valve knob
1.2.3 Remove Phillips screws from base
JOBO Labortechnik GmbH + Co. KG
Kölner Str.58
D-51645 Gummersbach (Derschlag)
ATL-1500
1.2.4 Tilt top of unit forward
1.3 Closing the unit
1.3.1 Before closing the unit, guide connecting pipe for
drain valve into opening
Assembly advice: The drain valve knob must positively
Made in Germany
lock when pushed in (snapping sound)
Technical modifications are reserved 09097