Toyota RAV 4 2019 Manual page 465

5-13. Phone operation (Hands-free system for cellular phones)
For PBAP compatible Blue-
■
®
tooth phones when "Auto-
matic Transfer" is set to off
(P.476)
1
Select the desired item.
Select to always transfer all
A
the contacts from a con-
nected cellular phone auto-
matically.
Select to transfer all the con-
B
tacts from a connected cellu-
lar phone only once.
Select to cancel transferring.
C
2
Check that a confirmation
screen is displayed when the
operation is complete.
For PBAP incompatible but
■
OPP compatible Blue-
®
tooth phones
1
Select the desired item.
Select to transfer the con-
A
tacts from the connected cel-
lular phone.
Transfer the contact data to
the system using a Blue-
®
tooth phone.
Select to add a new contact
B
manually.
Follow the steps in "Register-
ing a new contact to the con-
tacts list" from step 2.
(P.479)
Select to cancel transferring.
C
● If your cellular phone is neither
PBAP nor OPP compatible, the
contacts cannot be transferred
using Bluetooth
can be transferred from USB
device. (P.478)
● Depending on the type of Blue-
®
tooth phone:
• It may be necessary to perform
additional steps on the phone
when transferring contact data.
• The registered image in the con-
tact list may not transfer depend-
ing on the type of Bluetooth
phone connected.
By keypad
1
Display the phone top
screen. (P.458)
2
Select "Keypad" and enter
the phone number.
3
Select or press the
switch on the steering wheel.
4
Check that the dialing screen
is displayed.
● Depending on the type of Blue-
465
®
. But the contacts
®
5