Toyota RAV 4 2019 Manual page 199

Changing engine switch
modes
Modes can be changed by
pressing the engine switch with
brake pedal released. (The
mode changes each time the
switch is pressed.)
*
1
OFF
The emergency flashers can be
used.
The multi-information display will
not be displayed.
2
ACC
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
3
ON
All electrical components can be
used.
"IGNITION ON" will be displayed on
the multi-information display.
*
: If the shift lever is in a position
other than P when turning off the
engine, the engine switch will be
turned to ACC, not to OFF.
4-2. Driving procedures
■ Auto power off function
If the vehicle is left in ACC for more
than 20 minutes or ON (the engine
is not running) for more than an
hour with the shift lever in P, the
engine switch will automatically turn
to OFF. However, this function can-
not entirely prevent battery dis-
charge. Do not leave the vehicle
with the engine switch in ACC or ON
for long periods of time when the
engine is not running.
NOTICE
■ To prevent battery discharge
● Do not leave the engine switch
in ACC or ON for long periods of
time without the engine running.
● If "ACCESSORY" or "IGNITION
ON" is displayed on the multi-
information display, the engine
switch is not in OFF. Exit the
vehicle after turning the engine
switch to OFF.
When stopping the engine
with the shift lever in a
position other than P
If the engine is stopped with the
shift lever in a position other
than P, the engine switch will not
be turned to OFF but instead be
turned to ACC. Perform the fol-
lowing procedure to turn the
switch to OFF:
1
Check that the parking brake
is set.
2
Shift the shift lever to P.
3
Check that "ACCESSORY" is
displayed on the multi-infor-
mation display and then
199
4