When the panoramic view
monitor (if equipped) is dis-
played
: The RCTA function is mal-
functioning (P.263)
The RCTA function detec-
■
tion areas
The areas that vehicles can be
detected in are outlined below.
The buzzer can alert the driver of
faster vehicles approaching from
farther away.
Example:
4-5. Using the driving support systems
Approach-
ing vehicle
■
The RCTA function is opera-
tional when
The RCTA function operates when
all of the following conditions are
met:
●
The RCTA function is on.
●
The shift lever is in R.
●
The vehicle speed is less than
approximately 5 mph (8 km/h).
●
The approaching vehicle speed is
between approximately 5 mph (8
km/h) and 17 mph (28 km/h).
■
Setting the buzzer volume
The buzzer volume can be adjusted
on the multi-information display.
(P.94)
■
Conditions under which the
RCTA function will not detect a
vehicle
The RCTA function is not designed
to detect the following types of vehi-
cles and/or objects.
●
Vehicles approaching from directly
behind
●
Vehicles backing up in a parking
space next to your vehicle
●
Vehicles that the sensors cannot
detect due to obstructions
Speed
18 mph
Fast
(28 km/h)
5 mph (8
Slow
km/h)
269
A
Approxi-
mate
alert dis-
tance
65 ft. (20
m)
18 ft. (5.5
m)
4