Toyota RAV 4 2019 Manual page 150

150
3-4. Adjusting the steering wheel and mirrors
Icons
Select to zoom in/out the
displayed image.
Select to enable/disable the
PLS (point light source)
mode.
The glare from the head-
lights of vehicles behind is
reduced to help ensure an
image on the display in the
digital mirror mode.
When the PLS mode is
enabled,
played on the top left cor-
ner of the display.
*
: This is a function for the optical
mirror mode, however, the setting
can also be changed while using
the digital mirror mode.
Enabling/disabling the
■
automatic anti-glare func-
tion (optical mirror mode)
The automatic anti-glare func-
tion in the optical mirror mode
can be enabled/disabled. The
setting can be changed in both
the digital mirror mode and the
optical mirror mode.
When using the digital mirror

mode
P.148
When using the optical mirror

mode
1
Press the menu/enter button.
The setting display will be dis-
Settings
will be dis-
played.
2
Press
select buttons to select
(on) or (off), and press
the menu/enter button.
The icons will disappear.
■ Adjusting the display (digital
mirror mode)
● The icons will disappear if a button
is not operated for approximately
10 seconds or more.
● If the displayed image is adjusted,
it may appear distorted. This is not
a malfunction.
● If the brightness of the Digital
Rear-view Mirror is set too high, it
may cause eye strain. Adjust the
Digital Rear-view Mirror to an
appropriate brightness. If your
eyes become tired, change to
optical mirror mode.
● The brightness of the Digital Rear-
view Mirror will change automati-
cally according to the brightness
of the area in front of your vehicle.
To prevent the light sensors
■
from malfunctioning
To prevent the light sensors from
malfunctioning, do not touch or
cover them.
/ of the