Table of Contents
Advertisement
Quick Links
Finished Wall
1-1/2"
2-1/2"
28-1/8"
7-1/4"
11-3/8"
12"~11-3/8"
US-WP9005
Warranty - Chinaware - limited lifetime. Commercial: 1 year. Mechanical parts: 5 years, Commercial: 1 year. Seat: 1 year, Commercial: 1 year.
For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371)
M-PRO One-piece Dual-flush Toilet
Wisp One-piece Dual-flush Toilet
12-3/4"
Finished Floor
tel: 508-381-6062
fax: 508-381-6068
1 - 5
Finished Wall
29
7
1.28fpg/4.8lpf
1"(25mm)
1
1
"(38mm)
2
3
11
" (290mm)
8
3
12"~11
" (305mm~290mm)
8
US-PRO9005
email: technical@crosswaterlondon.com
US-PRO9005
US-WP9005
1
14
" (368 mm)
2
7
"(11mm)
16
1"(25mm)
Finished Floor
www.crosswaterlondon.com
Issue date: 220716
C
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crosswater US-PRO9005
Summary of Contents for Crosswater US-PRO9005
- Page 1 US-PRO9005 Warranty - Chinaware - limited lifetime. Commercial: 1 year. Mechanical parts: 5 years, Commercial: 1 year. Seat: 1 year, Commercial: 1 year. For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757 Toll free number: 844-XWATER-1 (844-992-8371)
- Page 2 Installation Instructions PARTS SUPPLIED: Check to make sure you have all these parts from the package: 2 pieces Nut 2 pieces clip 2 pieces bolt 2 pan protector 2 pieces screw 2 pieces washer 2 pieces cap sleeves TOOLS REQUIRED: •...
- Page 3 Figure 1 1) Clean any debris out of the closet flange (not supplied), then install the mounting bolts into the slot of the flange head down with the threaded shank of the bolt pointed upward as shown (See figure 1). Slide each bolt until the end of slot.
- Page 4 Adjusting the Push Button Rods tank lid After making sure the push buttons are installed correctly, incorrect - place the lid on the tank. rods pressing down or touching valve If rod(s) is too long, water will keep running in the toilet. 1) Loosen the lock nut(s) counterclockwise.
- Page 5 Fill Valve Installation Instruction Figure 2 Replacement Installation Figure 3 Figure 1 REFI LL TU BE REFI LL TU BE 1) Shut off the water supply. Flush the toilet and remove any remaining water from the tank. Remove the old fill valve. FLO AT 2) Install new fill valve by sliding the threaded FLO AT...
Need help?
Do you have a question about the US-PRO9005 and is the answer not in the manual?
Questions and answers