End The Configuration Utility - IBM iSCSI Host Bus Adapter Manual

11. Press Esc. Highlight Save changes using the up or down arrow keys and press Enter to select.
Note: This may take several minutes to complete and will end up at the Fast!UTIL Options menu.

End the configuration utility

When all iSCSI HBA configuration is complete, the configuration utility can be ended by using the
procedure in this section.
1. Press Esc on the Fast!UTIL Options menu.
2. Highlight Reboot system using the up or down arrow keys and press Enter.
The xSeries or blade server will now start to reboot. The xSeries or blade server power should now be
turned off. Refer to the xSeries or blade server documentation to complete this step
21
Configure iSCSI HBA